Troubleshooting
36
P2260JH | 2019-05
Apex Tool Group
9
EN
Occasional interrup-
tions in WLAN data
communication.
Distance between
the access point
and the tool is too
great.
1.
Check the signal strength at the tool in the
RF settings
sub-
menu.
2.
If necessary, reduce the distance between the access point and
the tool.
The tool is already
assigned to another
controller.
1.
Check whether the tool (IP address) is also assigned to another
controller.
2.
If yes, delete the assignment in the other controller.
A tool can only be assigned to one controller.
Excessive data traf-
fic on WLAN Net-
work.
Reduce data traffic on WLAN
network.
1.
On the
Basic
controller
screen, increase the
trigger
torque
.
2.
On the controller screen
Navigator > Advanced >
Controller > Trace record-
ing
, deactivate the data
transmission graphs.
Reduce data traffic on WLAN
network.
1.
On the controller screen
Main menu > Process pro-
gramming > Settings > Fas-
tening stages > Fastening
stage # > Sequences
,
increase the
Trigger torque
.
2.
On the controller screen
Main menu > System pro-
gramming > Special func-
tions > MWF
, disable the
torque graph data transmis-
sion.
a. ) Software-dependent measure. Discrepancy possible when using Custom Tool Software.
Problem
Possible cause
MeasuremPro400GCD
(SW S168813)
Measure for mPro400S… (e.g.
SW S168841)
a
WLAN data communication between controller and tool
