Menus and Functions
44
P2398PM | 2018-12
Apex Tool Group GmbH
3
EN
3.11.3
Saving a torque graph
The torque graphs can only be saved in the FastApps mode. In the mPro mode, no torque graph is
recorded on the tool.
The torque graph shows how the torque increases over the course of a tightening.
>
>
Abb. 3-35: Submenu – Saving a torque graph
PTq
Peak torque
Angle
Angle
AngleMin
Minimum angle
AngleMax
Maximum angle
Evaluation
Evaluation of the result. Either OK or NOK is entered.
Stage
Fastening stage
Reason
Shut-off cause. See Error messages for shut-off cause, Seite 52.
GraphicID
Number of the graphic entry.
Column
Description
Button
Description
Start the saving process.
Display of the saving progress.
The status bar indicates what percentage of the torque graphs are already saved.
Display of the status of the saved torque graphs.
After saving, the status bar is red or green:
•
Green: The saving process has been successfully completed. There is an "OK" in
the status line.
•
Red: An error occurred during the saving process. See Error messages, software
updates and data storage, Seite 52.
0%
0
