Apex Tool Group GmbH
P2398PM | 2018-12
17
Menus and Functions
3
EN
3.7
FastApps menu
The FastApps menu is used to parameterize Linking groups in the FastApps mode.
In the mPro mode, the FastApps menu has no function.
>
Abb. 3-6: Menu – FastApps menu
Button
Description
FastApps mode is activated.
→ mPro mode is disabled.
FastApps mode is disabled.
→ mPro mode is active.
Only the parameters for the selected mode apply. If the mode is changed, the current
settings will not be carried over to the new mode.
Display of the currently selected Linking group.
Up to ten Linking groups can be programmed. The number on the button indicates
which Linking group is selected.
Linking group with torque shutoff.
The number to the right of the symbol indicates the
shut-off torque
. The unit corre-
sponds to the selection, see Selecting the torque units, Seite 29.
Linking group with angle shutoff.
The number to the right of the symbol indicates the shut-off angle.
The associated Linking group is not programmed.
If the Linking group is not parameterized, it can not be selected on the run screen.
1
11.30
2
-
1
