ClearOne V-There 2000, Руководство по установке и эксплуатации

Страница: 17 / 80

11
Getting Started ~ Hardware Setup
To install a second AccuMic II
The optional AccuMic II kit includes the mic pad and cable required to connect a
second AccuMic II to the system.
1. Connect the included cable to the 8-pin connector on the rear of the second
AccuMic II (see Figure 2.5).
2. Connect the other end of the cable to the 8-pin connector on the first
V-There mic pad.
3. Place the mic pads as far apart as possible on a table that is located in the
center of the conference area, away from walls and corners, for best
acoustical performance.
When two mic pads are used, they share mic gating information for optimum audio
clarity. Pressing the Mute button on either mic pad will mute both mic pads.
ClearOne Communications ~ www.clearone.com
8-Pin Connector 8-Pin Connector
8-Pin Connector 8-Pin Connector
8-Pin Connector 8-Pin Connector
8-Pin Connector 8-Pin Connector
10' (3-meter) Mini-DIN Cable 10' (3-meter) Mini-DIN Cable
To Video To Video
Codec Codec
Extension AccuMic II Extension AccuMic II
First AccuMic II First AccuMic II
Figure 2.5 Connecting a second mic pad
The second AccuMic II
receives power through the
first one, eliminating the
need to connect a separate power
supply.
✍