ClearOne V-There 2000, Руководство по установке и эксплуатации

Страница: 16 / 80

ClearOne Communications ~ www.clearone.com
Getting Started ~ Hardware Setup
10
To install the AccuMic II
1. Plug the red connector on the supplied AccuMic II cable into the Mic
connector on the rear of the V-There unit (see Figure 2.4).
2. Attach the other end of the cable to the 10-pin connector on the AccuMic
II. Note that the AccuMic II receives its power from the V-There system; no
external power supply is needed.
3. Place the mic pad on a table or desk in the middle of your conference area,
away from walls and corners, for best acoustical performance.
The Mute button on the top of the microphone pad mutes all three mic
elements. Press the button once to mute the mic pad system; press it again to
unmute and resume the conference.
Optionally, you can connect a second AccuMic II pad to increase the capacity
of the video conferencing system (see page 11).
AccuMic II
V-There
Figure 2.4 Microphone
installation