ClearOne V-There 2000, Руководство по установке и эксплуатации

Страница: 32 / 80

ClearOne Communications ~ www.clearone.com
26
Configuration ~ ISDN Setup
3. Enter the alias (H.323) name in the Alias Name field if your gatekeeper
software contains an H.323 name.
4. Enter the E164 name in the E164 Name field if your gatekeeper software
contains an E164 name. This is essential to receive calls from an H.320
system via gateway.
5. Select the rate you want to use.
6. Enter the delimiter in the Delimiter field that the gatekeeper is to use when
placing nx64k calls. Your system administrator sets a symbol or digit as the
delimiter.
7. Enter the prefixes that your gateway uses to place specific types of
LAN/WAN calls in the 128K field, 384K field, etc. for the rate you are
using. If these prefixes are not configured, the LAN-WAN call type is not
available when making a call.
If you do not use a gateway, these fields can remain blank.
Required information
Before you begin the ISDN setup, it is recommended that you connect your V-There
unit to your ISDN connection using the supplied ISDN cable(s). The number of
cables that you need will depend on the number of ISDN channels that are available
to you and are supported by the V-There model. You will need one ISDN cable if you
are using the 2100 model and up to three if you are using the 2200 (ISDN cables
are included with these models).
The following section lists the information required for completing the ISDN
Settings screen:
• The type of ISDN exchange (or switch type) to which V-There is to be connected
• The local ISDN numbers for the lines to be used. These must be entered in the
proper order.
• Whether the ISDN network is restricted to a multiple of 56K (ISDN-R, nx56K)
• SPID information
• Any prefixes or other specialized information to access long-distance calling on
ISDN lines.
This information should be available from your system administrator or telephone
company.
ISDN Setup
The V-There connects to an
ISDN network via an S/T
interface. An optional
(required for U interfaces) NT-1 or
NT-3 adapter is available through
your ClearOne distributor.
✍
The V-There 2000 does not
support ISDN operation.
✍