ClearOne V-There 2000, Руководство по установке и эксплуатации

Страница: 29 / 80

ClearOne Communications ~ www.clearone.com
23
Configuration ~ LAN Setup
Required information
Before you begin the LAN setup, it is recommended that you connect your V-There unit
to your LAN using the Ethernet (marked LAN) cable.
Network settings
To use V-There over a LAN, you need to know if the LAN uses Dynamic Host
Configuration Protocol (DHCP).
If the LAN does not use DHCP, you need the following information prior to LAN setup:
• The IP address to be assigned to the V-There
• The subnet mask
• The IP address of the default gateway
• The IP address of the Domain Name System (DNS) server, if you want to use a
DNS server for name lookup
• The IP address of the Windows Internet Naming Service (WINS) server, if you
want to use a WINS server for name lookup.
To configure LAN (DHCP)
1. If you are not in the Expert Mode, press the Mode key on the keyboard to
display the Expert Mode menu.
2. Click the Expert System Setup button (first menu button). This displays the
configuration toolbar.
3. Click the Adjust Communications Settings button. This opens the
Communications Settings window, with the Network screen displayed.
The Network section is where you establish the network settings your unit will use.
Figure 5.2 Network screen #1
Figure 5.1 Expert Mode menu