ClearOne V-There 2000, Руководство по установке и эксплуатации

Страница: 12 / 80

Getting Started ~ Positioning the V-There
6
Before using the V-There, please read the enclosed end user license
agreement—it contains important information concerning your use of the V-There
software. If you have the 2100 or 2200 model, please read the section on ISDN.
North American users
This equipment uses an S/T interface and is designed to connect to an external NT-1
terminal adapter (or optionally an NT-3, if you are using all three ISDN lines with a
V-There 2200). If your ISDN switch supplies a U interface, an external NT-1
terminal adapter must be used. Please contact your ClearOne distributor for
information about acquiring an external NT-1 or NT-3.
ClearOne Communications ~ www.clearone.com
ClearOne is not responsible
for product damage
incurred during shipment.
You must make claims directly with
the carrier.
!
Place the V-There main unit on a flat hard surface that allows adequate airflow
through the ventilation holes. Do not place the main unit in direct sunlight or near
sources of direct heat.
We recommend that you place the V-There on top of the video monitor. This
gives a more natural appearance to a video conference, since you will remain in
the line of sight of the camera. You will also be able to view the video image of the
person you are calling, without adjusting your position.
You can position the camera up to five meters (16.5 feet) away from the
V-There unit. Refer to page 17 for information about installing the camera
remotely.
The difference between the
V-There 2100 and 2200 is
that the 2200 features a
higher H.320 data rate (64-
384kbps vs. 64-128kbps). The
2000 model supports only H.323,
not H.320.
✍
Before you can begin using your V-There, you must connect the V-There to the
following:
• Power supply
• Monitor
• Microphone
• Audio speakers
• LAN and/or ISDN (w/ISDN interface)
• Camera w/infrared receiver (if the camera is being installed remotely)
Positioning the V-There
Before You Install
V-There uses an S/T ISDN
interface, requiring an
NT-1 or NT-3 adapter if
your network uses a U interface.
You can purchase an NT-1 or NT-3
through your ClearOne dealer.
✍