ClearOne V-There 2000, Руководство по установке и эксплуатации

Страница: 65 / 80

ClearOne Communications ~ www.clearone.com
59
Appendix C ~ Reprogramming V-There Via Serial Line
Cause 88: Incompatible destination (Cause 88)
The most likely cause is dialing the wrong number—for instance, trying to place a
video call to a FAX machine. Check numbers carefully.
Cause 91: Invalid transit network selection (Cause 91)
This means that somewhere along the routing an invalid network was selected. If the
final dialed number is correct, this is either a temporary problem resolved by re-
dialing or a local PABX is incorrectly configured.
Cause 95: Invalid Q931 message (Cause 95)
This is either a very temporary condition or the ISDN settings for V-There specify
the wrong switch type.
Protocol error causes
These are a result of either a bug in V-There or of the unsuccessful configuring of the
ISDN switch type. They are listed for completeness.
Cause 96: Mandatory information element missing (Cause 96)
Cause 97: Message type non-existent (Cause 97)
Cause 98: Message not compatible with call state (Cause 98)
Cause 99: Information element non-existent (Cause 99)
Cause 100: Invalid information element contents (Cause 100)
Cause 101: Message not compatible with call state (Cause 101)
Cause 102: Recovery on timer expires (Cause 102)
Cause 111: Protocol error (Cause 111)
Other causes
Cause 127: Internetworking (Cause 127)
This means an error occurred somewhere on a network which does not provide error
reporting. Try again or consult your ISDN provider.
This procedure is required in either of the following circumstances:
• A web-based download has failed during the copy to flash, rendering the
V-There inoperable.
• For some reason the V-There cannot access the Internet via the built-in
Ethernet port.
Appendix C: Reprogramming V-There Via Serial Line