manualshive.com logo in svg

Clearfield FieldSmart, Руководство по установке

Поделиться
Скачать
Clearfield FieldSmart Скачать руководство пользователя страница 3

3

FieldSmart

®

 FxDS Frame

__________________________________________________________

Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected] 

Manual 012010 REV H - July 2018

Application

The FxDS Frame Kit is a fully contained fiber management system for the inside 

plant. The seven foot seismic frame is provided along with full length front and rear 

doors that provide protection for termination fields, incoming distribution cables and 

interbay routed jumpers. When used in conjunction with the FxDS panels, ultimate 

density and protection is offered at “grow-as-you-go” cost.

Description

The FieldSmart Fiber Crossover Distribution System (FxDS) provides a system of 

modular and scalable building blocks to configure a frame system that delivers 

industry-leading scalability and fiber protection without jeopardizing density or 

increasing cost. 

The FxDS system easily configures for panel placement and scales simply from 12 

ports to a full rack of 1,728 ports as needed. The FieldSmart FxDS requires only 

four unique building blocks (SKUs) to configure initial deployment. The user then 

adds into the frame whatever is needed as subscriber take rates dictate. The FxDS Frame Kit is an industry standard 

7’ x 19” seismic frame that is easily assembled with a set of vertical interbay slack management panels, upper and lower 

crossover troughs and a set of removable doors.

SmartRoute Troughing builds upon the cable management functionality with a sleek method of providing a continuous 

channel for bay-to-bay routing in a safe and efficient manner without increasing jumper lengths. SmartRoute Troughing 

allows the service provider to carry the distance and weight of thousands of jumpers on a horizontal plane. This spreads 

the pile up and eliminates the risk of micro and macro bends. When used across multiple frames, up to three continuous 

channels are created allowing bay-to-any-bay routing in a safe and efficient manner. Front route troughs are available when 

the frame is deployed with a PON Kit or for environments where interbay routes are not anticipated.

Technical Specifications

 FieldSmart FxDS Frame Kit

 Dimensions

7’ H x 36” W x 18” D

 Ratings

Compliant to Telcordia GR-449

 Port Density

1,728 SC or 3,456 LC

 Cassette Types Supported

Clearview

®

 Blue

 Connector Types

SC/UPC, SC/APC, LC/UPC, LC/APC, MPO (additional options available upon request)

 Cable Types

Indoor Riser, Indoor Plenum, Indoor/Outdoor, Outdoor (Riser/Non-Rated), Outdoor Armored (Riser/Non-Rated), FieldShield

®

 Splice Capacity

12 or 24 splices in each Clearview Cassette

 Storage Capacity

One meter of 900 μm fiber

 Cable Entry Compatibility

Top and bottom (floor) entry

 Caple Entry Clamp Location

On-frame cable clamps (Note: On-frame cable clamps included with FxDS Patch Panels)

 Recommended Jumper Length

Three meters, plus two meters for each additional frame

 Material

Steel with almond powder coating

Содержание FieldSmart






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды