137
FieldSmart
®
Fiber Active Cabinet (FAC) 900
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 020420 REV B - April 2019
Step 8:
Step 9:
f.
Insert the conduit fitting into the mounting flange and snap in place.
Make a fiber pull as follows:
a.
Remove the tape securing the twine to the conduit.
b.
Route one end of the twine along the outside of the conduit until the end.
c.
Tie the ends of the twine together with a looped knot (similar to a bowline knot or fisherman’s knot).
Feed the fiber jumpers through the conduit as follows:
Note:
You may feed the first few fiber jumpers through the conduit without using the fiber pull.
a.
Secure a fiber jumper to the fiber pull (for example, tie the loop in the twine around the jumper connector or
tape the jumper to the fiber pull).
Note:
You can secure more than one jumper to the fiber pull (for example, stagger and tape jumper connectors
on the fiber pull).