CleanStation SRS-DT3 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 13

background image

CleanStation Dimension SRS-DT3

TM

Jet action cleaning

Troubleshooting (continued)

Parts take an abnormally long time to clean

• Check the temperature of the water. Optimal temperature is 150F.

• Cleaning times are faster with fresh cleaning solution. Change the solution whenever the water gets too dark (coffee brown in
color).

• Check that the suction strainer and the manifold jets are clear of debre per the maintenance instructions.

Controller display reads . . .

• Er4: Please contact PM Technologies.

• Er5: Please contact PM Technologies.

Machine will not stay running

• Check that the water level is 1” from the top of the tank.

• Check that the suction strainer and the manifold jets are clear of debre per the maintenance instructions..

Technical support

• Telephone (USA) 1-763-425-1383 extension 303. Office hours 8 a.m. to 5 p.m. Monday through Friday, Central Standard Time.

• If the CleanStation

TM

is no longer under warranty and no service contract has been purchased, there may be a charge for tech

support calls. Customers will be made aware of these charges at the time of the call.

• Email: [email protected]

• World Wide Web URL: http://www.cleanstationsrs.com

«
...
10
11
12
13
»

Содержание SRS-DT3














Отзывы:

Нет отзывов

Похожие инструкции для SRS-DT3

Бренд: Keller Страницы: 2

Бренд: Optimum Страницы: 70

DC39 multi floor

Бренд: Dyson Страницы: 12

Бренд: Johnson Страницы: 32

Бренд: Rowenta Страницы: 81

Бренд: Bissell Страницы: 14

Zonder Robo Next

Бренд: Zeegma Страницы: 100

Бренд: Daikin Страницы: 48

Бренд: OBH Nordica Страницы: 40

Бренд: Performance Tool Страницы: 6

Бренд: Bennett Read Страницы: 16

Бренд: ElectrIQ Страницы: 26

Бренд: Black+Decker Страницы: 20

Бренд: Zelmer Страницы: 50

Бренд: Dadam micro Страницы: 12

Бренд: White and Brown Страницы: 16

Бренд: WAGNER Страницы: 4

Бренд: clair Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды