CLEAN BURN CB-200-CTB, Руководство оператора, Страница: 13 / 148

Coil Tube Boiler Operator's Manual: Models CB-200-CTB, CB-350-CTB, and CB-500-CTB
1-5
For Your Safety... (continued)
Guidelines for Used Oil Tanks
For the safe storage of used oil and the safety of
persons in the vicinity of the used oil supply tank,
ensure that your tank installation adheres to the
following safety guidelines:
• The tank installation must meet all
national and local codes.
Consult your
local municipal authorities for more
information as necessary.
• Review and adhere to the safety
guidelines for used oil supply tanks
as stated in the WARNING shown.
• Ensure that the tank for your boiler
installation complies with all code and
safety requirements as stated here. If the
tank does not comply, DO NOT use it.
• If you do not have a copy of the tank
safety label pictured at right, please
contact your Clean Burn dealer for the
label, which is to be affixed directly on
your used oil supply tank.
ONLY place these listed substances in
this used-oil supply tank:
- Used crankcase oil
- Used automatic transmission fluid
- Used hydraulic oil
- #2, #4, #5 fuel oil
Do NOT place flammable or corrosive
substances such as gasoline, chlorinated
oils, solvents, paint thinners, or any other
unsafe substances in this used-oil supply tank.
Tank installation MUST comply with NFPA
30 and 31 Fire Codes, including the following
requirements:
- Tank must be listed to UL 80 or UL 142.
- Tank must be vented to outside.
- Emergency vent or explosion relief must
be installed on tank.
- Inside fill allowed only with funnel including
1/4 turn-to-close ball valve, which must be
closed after filling.
- All other openings must be plugged.
- All oil lines must be constructed of copper,
steel, or brass components. Do NOT use
rubber or plastic tubing or piping, or any other
inappropriate material.