Claydon HYBRID MOUNTED, Руководство оператора

Страница: 23 / 51

23
E
IN FIELD OPERATION
OPERATORS MANUAL - HYBRID MOUNTED
To check the seeding depth is consistent from the front to the rear of the seeding chassis scrape the soil
away from each seeded row and measure the depth of the seed compared to the undisturbed soil between
the seeded rows. If there is a difference between rows seeded then adjust the seeding chassis as stated
above until even seeding is achieved.
1. Seed depth
2. Original soil level
CHECKING SEEDING DEPTHS
SET UP THE LEVEL BOARD
The Level Board (also known as Batter Board or Ski Board) should be set up to drag along the top of the
ridges with little down pressure. The down pressure can either be increased or decreased by altering the
adjuster at the rear of the drill. The levelling boards are designed to level the ridges created from the lead-
ing tine and not to perform any kind of pressing operation. The Boards should not be set at too steep an
angle and should have the appearance of skiing along the surface.
The green harrow tines may also be fitted to follow behind the levelling boards or used as an alternative
depending on the machine specification.
The level board angle is adjusted on the pin holes where the tool bar connects to the arms. The green
harrow tines should be situated at an acute angle with the tail of the tine positioned firmly and parallel to
the ground. This angle can be adjusted by altering the pin holes on the connecting arm. The image about
displays our suggested setting.
1. Harrow tines
2. Level board
3. Level board/tine adjustment