Claydon HYBRID MOUNTED, Руководство оператора

Страница: 20 / 51

E
IN FIELD OPERATION
20 OPERATORS MANUAL - HYBRID MOUNTED
1. Ensure all hydraulic hoses are connected to the tractor spool valves correctly.
2. With the drill in the raised position, operate the spool valve to unfold the wings (hose marked II -
yellow
)
1. Stop the fan.
2. Operate the tractor spool valve (hose marked II -
yellow
) to fully fold the drill.
FOLDING THE DRILL
Unfolding the Drill
IMPORTANT
THE HYDRAULIC FREE FLOW SERVICE MUST BE
PLUGGED IN PRIOR TO THE DRILL BEING OPERATED
FAILURE TO DO SO WILL RESULT IN DAMAGE WHICH IS
NOT COVERED BY WARRANTY.
WING BALANCING - 6M MACHINES ONLY
The Wing Balancing system spreads the weight of the chassis and the
full hopper over the whole width of the drill and not just in the centre
section. In this way, it allows the wings to float and follow the contours
of the ground.
To ensure the system is working correctly the operator should operate
the tractor spool valve to lower the wings, (spool needs to be set up so
pushing the controller forward lowers the wings, the spool must also
have a float position.) once the pressure has reached 10 bar (145 psi)
the operator needs to push the controller fully forward into float to
allow excess pressure to return to the tractor in the event of the drill
hitting a large obstacle and the wings raising beyond their pre-set limit.