Claydon Hybrid Front Hopper, Руководство оператора и каталог запчастей

Страница: 9 / 54

Front Hopper
[7]
7.0 Equipment Overview
The terms ‘front’ ‘rear’ ‘left’ and ‘right’ in this manual refer to the machine as follows:
1. ‘Front’ indicates the front of the machine as you are sat in the operator’s seat.
2. ‘Rear’ indicates the three point linkage end of the machine.
3. ‘Left’ indicated the left of the machine as you look from the operator seat.
4. ‘Right’ indicates the right of the machine as you look from the operator’s seat.
Figure 1 – Overall view
8.0 Preparation
8.1 General
On taking delivery check for any possible damage that could have occurred during transit.
Remove all parts (flexible hose, spare parts etc.) that may have been stored in the hopper for
transit and fit to the machine.
The following items should also be delivered with the Front Hopper:
7m x 110mm ID flexible air hose,
4m x 110mm ID plastic pipe,
4 x Stainless Steel jubilee clips,
1 x Tractor Power Cable,
1 x Black cable T-Harness (maybe already fitted to drill),
1 x Extension cable (Front hopper – Drill),
1 x Instruction Manual and Parts Catalogue,
1 x Fan 1” ISO with 18L male thread
Please contact Claydon if any are missing.