Front Hopper
[2]
Commissioning Check Sheet and Conformation Form – Front Hopper
All points in this form must be completed on the commissioning of a new Claydon machine with the
end user. This form along with a filled in Warranty Card (located in the instruction manual) must be, fully
completed, signed by the customer and returned to: The Service Department, Claydon Yield-O-Meter
Ltd, Gaines Hall, Wickhambrook, Newmarket, Suffolk, CB8 8YA within 7 days of the commissioning of the
machine for Warranty to be valid.
It is the customer’s responsibility to return these forms.
Customer Name:
……………………………………………..........
Telephone Number:
……………………………..
Machine serial number:
…………………………………………….
Date of commissioning:
……………………..
Address:
……………………………………………………………………………………………………………………….
County:
……………………………..
Country:
………………………………………
Post code:
…………………………
Task
Completed
The customer (and any operator of the machine) has been issued with and read the operators
manual.
The customer’s tractor has 1 inch ‘free flow return’ for any hydraulic motor return lines. Fan speed has
been correctly set.
The customer has fitted the electrical power cable (Red and Black Cable) which is required to be
connected directly to the battery.
The customer understands how to correctly change the coulters and coulter boots.
The customer understands how to adjust the metering unit on the machine to achieve the correct
setting.
The customer knows how to fill and empty the hopper.
The customer understands the Artemis control system.
The customer understands how to calibrate the machine.
The customer understands how to set the machine level.
The customer knows all the lubrication/maintenance points on the machine.
I ………………………………………… (
representative name
)
have on behalf of ……………………………………….(the
dealer name) commissioned the machine above to the
best of my ability and have covered all the points in this
check as a minimum.
Signed
………………………………………………..
Date
…………………………..
I …………………………………………(
end user name
)
have received the commissioning of my machine from
a qualified Claydon representative and am happy
with the competence of the representative and the
level of service I have received. All the details on this
form are correct to the best of my knowledge.
Signed
…………………………………………………
Date
…………………………..
Содержание Hybrid Front Hopper
Страница 35: ...Front Hopper 33 Appendix B Declaration of Conformity ...
Страница 41: ...Front Hopper 39 ...
Страница 43: ...Front Hopper 41 Part s Manual ...
Страница 44: ...Front Hopper 42 Front Hopper Tank Assembly ...
