Claydon Hybrid Front Hopper, Руководство оператора и каталог запчастей

Страница: 21 / 54

Front Hopper
[19]
9.6 Setting Up the Seeding System
The Fertiliser level sensor can be set in three positions for different application rates: the upper
for high Fertiliser rates, the middle setting for medium Fertiliser rates and the lower position is
ideal for low Fertiliser rates.
Figure 18 – Level sensor in lower position
9.7 Calibrating the Seed Rate
Prior to explaining the calibration process an overview of the metering unit highlighting the
various components can be seen in Figures 19 – 24.
9.7.1 Overview of the Metering Unit
1. Separation slider plate
2. Lid to empty seeds
3. Slider position scale
4. Red lever
5. Air pipe
6. Handle
7. Calibration button
Figure 19 – Metering unit
1. Setting for low Fertiliser rates (Current
position)
2. Setting for medium Fertiliser rates
3. Setting for high Fertiliser rates
To adjust the hopper level sensor setting:
From inside the hopper pull the end of the
bracket nearest the sensor away from the
hopper and over the locating bolt head.
Move the sensor to the required position
and locate on the appropriate bolt head.