Claydon Hybrid Front Hopper, Руководство оператора и каталог запчастей

Страница: 34 / 54

Front Hopper
[32]
H.3.S
Seed motor module
temperature
shutdown
 Module
temperature has
exceeded the
value programmed

Motor speed very low
 Excessive load applied to
motor which for a prolonged
time has caused the high
module temperature
H.4.S
Seed motor module
overload shutdown

Motor current
requirement
exceeded so
module shutdown
and motor
operation inhibited

Motor stalled
 Excessive drag on the
metering unit requiring high
motor current
H.5.SF
Forward Speed
Failure (Seed & Fert)

Check wiring of forward
speed in alarmed connection
box.

Check for continuity between
pin 2A on MCM 1 (white wire)
and pin 2A on MCM 2
H.5.LR
Forward Speed
Failure (Left & Right)

Check wiring of forward
speed in alarmed connection
box.

Check for continuity between
pin 2A on MCM 1 (white wire)
and pin 2A on MCM 2
H.6.S
Motor has Stalled

Check for blockages in the
metering unit

Disconnect motor from
metering unit and ensure
both units rotate separately.

Check motor and gearbox.

Open and Close Finger
Switch/Area Cut Out to Reset
Alarm Criteria