Clavister Eagle E20, Руководство по началу работы

Страница: 11 / 76

Chapter 2: Registering with Clavister
Before applying power to the E20 and starting cOS Core, it is important to understand the
customer and product registration procedures. There are two types of registration:
• Registering as a Clavister Customer
This involves registering basic contact and company information on the Clavister website
and establishing login credentials. Later, these credentials can also be used by cOS Core for
automatically registering the E20 hardware unit and automatically downloading the correct
license.
This is is a mandatory requirement for all new customers and needs to be done only once. A
description of doing this can be found below. Even if registration is not done before starting
the cOS Core wizard, the wizard will provide a link to the registration page so it can be done
while the wizard is running.
• Registration of the E20 Hardware Unit
This is mandatory for every hardware unit before a license can be downloaded. It can be
done in the following ways:
i. Automatic registration after cOS Core starts - This can done by the Setup Wizard
which starts automatically in a browser popup window when cOS Core Web Interface is
started for the first time. The wizard is described in
Section 4.2, “Web Interface and Wizard
Setup” .
ii. Manual registration of the E20 on the Clavister website - This is described in the last
half of this chapter. Manual registration may be necessary if the E20 does not have
Internet access.
A. Registering as a Clavister Customer
The E20 registration steps for a first time user of Clavister hardware are as follows:
1. Open a web browser, surf to http://www.clavister.com and select Log in.
11