Important: The time server URL requires the "dns:" prefix
When specifying a URL in cOS Core for the time server, it
must
have the prefix "
dns:
".
Once the values are set correctly, we can press the OK button to save the values while we move
on to more steps in cOS Core configuration. Although changed values like this are saved by cOS
Core, they do not become active until the entire saved configuration becomes the current and
active configuration. We will look at how to do this next.
Activating Configuration Changes
To activate any cOS Core configuration changes made so far, select the Save and Activate
option from the Configuration menu (this procedure is also referred to as
deploying
a
configuration).
A dialog is then presented to confirm that the new configuration is to become the running
configuration.
After clicking OK, cOS Core
reconfiguration
will take place and, after a short delay, the Web
Interface will try and connect again to the security gateway.
If no reconnection is detected by cOS Core within 30 seconds (this length of time is a setting that
can be changed) then cOS Core will revert back to the original configuration. This is to ensure
that the new configuration does not accidentally lock out the administrator. After
reconfiguration and successful reconnection, a success message is displayed indicating
successful reconfiguration.
Chapter 4: cOS Core Configuration
38
Содержание Eagle E20
Страница 10: ...Chapter 1 E20 Product Overview 10 ...
Страница 25: ...Chapter 3 E20 Installation 25 ...
Страница 67: ...Chapter 4 cOS Core Configuration 67 ...
Страница 76: ...Clavister AB Sjögatan 6J SE 89160 Örnsköldsvik SWEDEN Phone 46 660 299200 www clavister com ...