T H E C O N T I N U O U S P O W E R C O M P A N Y
Page 39
From the “Options” menu, click on the “Set Value” tab for A> Flash Trigger (Min.s).
This is the time that specifies the trip point that activates the Flash operation via the “TIMER”
relay contacts in the PIM30 after Utility power is lost.
From the “Options” menu, click on the “Set Value” tab for B> Flash Trigger (Volts)
This is the Battery Voltage that specifies the trip point that activates the Flash operation via
the “TIMER” relay contacts in the PIM30.
