T H E C O N T I N U O U S P O W E R C O M P A N Y
Page 13
HOUR METER - A cumulative run time meter that shows the total battery run time for the life
of the unit.
EVENT COUNTER - A meter that counts the number of times the system has gone into
battery operation. The Event Counter also increments each time the unit is turned off and
on by the SYSTEM POWER SWITCH.
RESET- A momentary pushbutton switch that resets the Event Counter to zero.
UPS OUTPUT PRESENT - A green LED that is illuminated to indicate fully conditioned and
continuous output AC power is present at the output receptacle.
RS232 - A RJ45 connector that outputs true RS232 communications signals.
UPS OUTPUT - A NEMA type duplex, 5-20R output connector that provides continuous
power. This receptacle is connected to the bypass line when the inverter is not running.
BYPASS - A 20A protective pop out circuit breaker in the bypass line of the continuous
output circuit. Protects the UPS OUTPUT 5-20R connector noted above.
SIGNAL - A DB-9 subminiature, female connector that outputs the open-collector signal
contacts that generate a low state during
utility interrupt
,
low battery
and
inverter off
conditions.
AC INPUT - A circular locking connector provided for AC power to and from the UPS.
DC INPUT - A circular locking connector provided for battery power to the UPS.
NOTE – For safety purposes, these AC INPUT and DC INPUT connectors are
tied into an interlock system which ensures that if either connector is
disconnected, the unit will discontinue operation.
SYSTEM GROUNDING STUD - A 10-32 x 3/4 threaded stud for system grounding
termination.
!
