Clarke 7630073, Руководство по эксплуатации

Страница: 3 / 48

3
• ALWAYS wear safety goggles when bending parts and when
grinding or sanding them.
• ALWAYS be sure that enough material extends beyond the stop
block and forming die when making bends, to be sure the material
does not come free and allow the handle to release suddenly.
• ALWAYS insert the hinge pins fully before making bends.
• NEVER try to bend material other than hot-rolled mild steel.
• NEVER try to bend flat material larger than 5 16 x 2 in or square or
solid round material larger than 5 8 in. (EXCEPTION: Rebar that is 1/2-
in. diameter may be bent around the 3” die only).
• NEVER bend round stock when using the sharp-angle-bend
attachment. Use only flat, hot-rolled, mild steel up to 3/16 x 2” or 1/4
x 1-1/4” with this attachment.
• NEVER try to bend material that is more than 1/ 4” thick around the
centre pin (instead, use the 1” die on the pin).
• NEVER modify the metal bender or use a handle extension arm other
than the one provided.
INDEX
Assembly 4
Basic Operations 5
Using the Stop Block 7
Using the Sharp-Angle-Bend Attachment 9
Examples
Bending Handles 10
Bending Tube Clamps 12
Bending Anchor Bolts and U-Bolts 15
Bending Letters for Signs 19
Parts List & Diagram 46