12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. Do not brush off dirt as it will be
forced into the filter fibres.
4. If necessary, the filter can be
carefully cleaned in warm soapy
water.
5. Rinse and let the filter dry
completely before refitting.
• If the compressor has been
used in a dusty environment,
the filter may need cleaning.
CHANGING THE OIL (6 MONTHLY/50 HOURS)
After the first 100 hours use, replace
the oil using CLARKE compressor oil
and CLARKE SAE30 engine oil.
Thereafter, replace the oil after every
50 hours of operation or every 6
months.
To empty the oil from the either the
compressor or engine remove the oil
drain plug shown and drain into a
suitable container.
Drain the oil when the engine is warm when it will drain quickly and
completely. A new washer should be used when replacing the drain plug.
CHECKING THE SPARK PLUG (YEARLY/EVERY 100 HOURS OF USE)
1. Pull the spark plug cap and lead
from the spark plug.
2. Use a spark plug spanner to
remove the spark plug.
3. Check for discolouration and use
abrasive to remove any build up
of carbon.
4. Check the condition of the spark
plug and replace if damaged.
CAUTION: ALLOW THE ENGINE TO COOL BEFORE REMOVING THE SPARK
PLUG.
Содержание 2090908
Страница 20: ......