2. Before You Begin
• Prior to beginning the installation of the Ungo MS2105 / MS2107, be sure that
you have completely read and understand this installation manual.
• Verify all the vehicle's functions work properly prior to installation (i.e.: power
windows, power door locks, climate controls, radio, etc.)
• Check with the vehicle’s owner on the location of the status LED and valet
switch.
• Protect the vehicle by using fender and seat covers.
• Double-check the location before drilling. Make sure that there are no wire
looms, hoses, or other obstructions. Failure to verify can result in serious
damage to the vehicle.
• Roll down a window(s) before beginning installation, to prevent getting locked
out of the vehicle.
• Set the Polarity Jumper inside the main unit for the Parking Lights.
Warning:
Probing wires with a Test Light can result in serious damage to the
vehicle's electrical system and/or deploy air bag system.
3. After The Installation is Complete
• Verify all the vehicle's functions work properly after the installation (i.e.: power
windows, power door locks, climate controls, etc.).
• Test all functions of the vehicle security system and make any changes to the
system parameters if necessary.
4. System Contents
• Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 5-Button 1-way Transmitter (MS2105 / MS2107) . . . . . . . . . .2/1
• 5-Button 2-way LCD Transmitter (MS2107 only) . . . . . . . . . . . . .1
• 20-Pin Main Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 2-Pin Status LED Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 2-Pin Valet Switch Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 3-Pin Door Lock Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• 4-Pin Shock Sensor Harness and Shock Sensor . . . . . . . . . . . .1
• 14-Gauge Starter wires with Insulated .250 Connectors . . . . . . .1
• Window Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
• Owner's Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• Installation Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
-3-
MS2107 install.qxd 8/25/2003 12:50 PM Page 3
Содержание UNGO MS2105
