Clarion UNGO MS2105, Руководство по установке

Страница: 13 / 32

-13-
4. Within 5 seconds, press the transmitter button corresponding to the desired
operating mode that Parameter.
The siren will chirp a number of times equal to the transmitter button pressed.
5. When finished, turn the ignition OFF to save changes.
13.3 Default Reset for User Programming
1. Turn the ignition ON.
2. Within 5 seconds, press the Valet/Override button 2 times and hold for 2
seconds.
The siren will chirp, indicating that Programming has been entered.
3. Press transmitter button 3.
The siren will chirp 6 times indicating the reset signal has been received, and
User Parameters have been reset to factory default.
14. Installer Programmable Parameters
Installer Programming Table
1. Door Unlock Pulse Single Double
2. Door Lock/Unlock Pulse Width 1 Second 3 Seconds
3. Passive Locking Off On
4. Door Entry Delay w/ Passive Arming Off On
5. Ignore Dome Light Delay Off On
6. Auxiliary 1 Output Momentary Timed Latched
7. Auxiliary 2 Output Momentary Timed Latched
8. Auxiliary 2 Activate on Arm Off On
9. Trunk Disarm Feature Off On
10. Lock on Remote Start Off On
11. Lock on Remote Shutdown Off On
12. Engine Start Sense Tach Sense Tachless Operation
13. Program RPM Learn RPM Gas Diesel
14. 2-way Transmitter Module Learn Module ID Learn Transmitter ID
15. Ignition 2 Relay Programming Ignition 2 Accessory 2 Starter 2
16. Horn Output Programming Horn Ignition 3
Step 14 is reserved for use with optional Ungo-Net 2-way LCD transmitter module (included with MS2107).
Feature Button 1 (default) Button 2 Button 3
MS2107 install.qxd 8/25/2003 12:50 PM Page 13