UK
Fitting the batteries
2.
Taking up a position within 10 metres of the RF Unit, press the RF
button of the remote control and wait for synchronization to be completed.
LOW BATT
OK
S M T W T F S
LOW BATT
PROG
A
B
LOW BATT
To check whether or the batteries of
the single RF Unit need to be replaced,
select the Unit of interest with the
button: the appearance of the
LOW
symbol indicates that the bat-
teries should be replaced without delay.
LOW BATT
OK
S M T W T F S
LOW BATT
PROG
A
B
LOW BATT
To check whether the batteries of the RF
Rain Sensor need to be replaced, bring
up the ‘Rain Sensor’ programming page
for the connected RF Unit: the appear-
ance of the
LOW
symbol indicates
that the batteries should be replaced
without delay.
If the batteries of the RF Rain Sensor and the RF Unit are com-
pletely flat, the two components will be unable to indicate their
battery charge status to the remote control.
51
02_Telecontroller_2U_PROFESSIONAL_EN.indd 51
14/01/16 10:47
