UK
PROGRAMMING LIMITS
Settings are subject to the following limits:
• RUN TIME: from 1 minute to 1 hour, then OFF
• START TIME: from 00:01 to 23:59, then OFF
The remote control will automatically rearrange the four daily START
TIMEs of each Programme, A or B, optimizing them in order to:
1) ensure that no watering cycle can start before the previous one
has finished;
2) ensure that no watering cycle can overrun the 24 hours available
on any given day.
On the other hand, the remote control will allow the temporary
overlap of a Programme A watering cycle and a Programme B wa-
tering cycle.
If the flow rate from the water supply is insufficient, this
overlapping condition could affect the quality of irrigation.
EXAMPLE OF USE
Set up RF Unit 1 on the remote control so that
Programme ‘A’
enables a
watering cycle ‘A’ on all the 4 Lines:
Line 1 for 5 min.
Line 2 for 10 min.
Line 3 for 5 min.
Line 4 for 15 min.
Select the start times for watering cycle ‘A’:
Start 1 at 5:00,
Start 2 at 16:00,
Use
57
02_Telecontroller_2U_PROFESSIONAL_EN.indd 57
14/01/16 10:47
