Claas LEXION 7000, Информация и базовые настройки поля

Страница: 59 / 62

In wet and laid crops
It is even more important to get a good cut and feed into
the combine. Check the knife and fingers regularly, paying
particular attention to the knife to finger gap.
To pick up laid crops
For the VARIO cutterbar, the skids under the bar must be
raised into their highest position. This will also reduce the
amount of soil sticking to the underside of the cutterbar.
For the CONVIO FLEX cutterbar, change the mode to a
flex mode.
Soil and foreign objects
These are more likely to enter the combine in a wet harvest,
it is vital that the stone trap be emptied at least daily. The
worse the conditions, the more frequently this should
be done.
Emptying the stone trap
Check that the APS concaves are clean. To do this, simply
open the concave to 50mm before switching off and
emptying the stone trap.
Under the concave is the preparation pan
This will become dirty as wet grain and soil passes over
it. The dirtier it becomes, the less effective it will be, and
hence, the dirtier the sample will become. With wet grain
it is important to try to keep to a cleaner sample than
normal, as you then waste less fuel drying chaff etc.
If the preparation pan is dirty
This is your first indication that further cleaning inside the
combine may well be required. When cleaning the rest of
the combine, follow the path of grain through the machine,
and open covers as you come to them.
Wet Harvest Recommendations
58