Claas LEXION 7000, Информация и базовые настройки поля

Страница: 58 / 62

Frequently Asked Questions
57
Threshing won’t engage and none of the hydraulics
are working.
Check that the road travel switch is not engaged.
Getting a poor sample after many adjustments.
Check that the preparation floor are clean.
The machine will not change gear.
Make sure that the multifunction lever is in its neutral
position and the automatic park brake has not been turned
off, then briefly press the gear shift switch once to
select a gear.
The machine goes off course when AUTOPILOT is
engaged.
Make sure that the FIELD SCANNER settings are correct in
the CEBIS settings.
The machine is lacking performance.
What are the settings in CEBIS, what are the crop and
field conditions. When chopping check that the knives are
sharp, the belt is set correctly.
No AUTOMATICS will engage
Make sure the cutterbar is in work and the cutterbar is
below the working position.
Getting a poor sample after many adjustments.
Check that the preparation floor are clean
How to set the cutterbar park position.
Disengage the cutterbar and the threshing, with the engine
running, press and hold the cutting height button on the
multi function handle until there is a beep from CEBIS.