Claas LEXION 7000, Информация и базовые настройки поля

Страница: 43 / 62

Losses
42
After adjusting the combine make sure
that the monitors also reflect what you
will accept as a loss. Adjust monitor
sensitivity so that the blue area is
approaching the limit lines, the white
line. This is particularly important when
running CRUISE PILOT and CEMOS
AUTOMATIC.
TIPS:
The easiest way to check for losses is
in the swath with the chaff spreader
and chopper disengaged.
Count the number of grains within
your hand print.
Where are the losses coming from?
To work out what is coming from the
rotors engage the chaff spreader and
disengage the chopper now then carry
out a check behind the combine,
count the grains on the floor.
To check the losses from the sieves
disengage the chaff spreader and
engage the chopper, offset the
Spreader and then count the grains.
Take into account what the grains look
like, unthreshed heads etc. Now make
the corresponding adjustments.