Claas LEXION 7000, Информация и базовые настройки поля

Страница: 40 / 62

Settings: Cleaning
39
Both the top and bottom sieves
are adjustable from 0 – 20mm in
the cab.
The sieves need to be open enough
to cope with high volumes of grain.
With wide sieve settings, there is a
need for high wind speed.
TIP: It is recommended that the sieves
are only adjusted by 1mm at a time.
The returns should be monitored
regularly both in terms of volume and
composition.
If fitted the returns monitor can be
adjusted in CEBIS. The volume of
grains in the returns (1) and the
volume of material (2).
TIP: The centre shaft of the auger
should always be visible.
The straw chopper can be engaged
and disengaged from work by
operating the buttons on the rear
of the machine or via CEBIS. The
spreader hood cannot be moved if the
chopper is still rotating.
Turn switch up or down this will move
the spreader into the first position if it
needs to be moved further, release the
switch and turn it again.
TIP: Make sure the hood has stopped
moving before releasing the switch.
All the settings for the powerspreader
can be set from the CEBIS screen.
make sure not to spread too wide.