Claas LEXION 7000, Информация и базовые настройки поля

Страница: 49 / 62

EASY: CRUISE PILOT
To engage CRUISE PILOT, press
the AUTOPILOT button on the joystick.
To de-activate the CRUISE PILOT,
either move the control lever with a jerk
or give a short firm press on both foot
brake pedals.
To monitor CRUISE PILOT once in
work,the bottom of the CEBIS screen
shows which are the limiting elements
(9-11). This shows which part of the
CRUISE PILOT will be the next limit. 12
is the present limit. To change this press
the screen and adjust the CRUISE PILOT
accordingly.
TIP: Use the QR code on the back of the
booklet to get the video for setting up
CEBIS in the field.
TIPS:
Make sure that the combine has crop
going through it before pressing the
AUTOPILOT button on the joystick.
If just using CRUISE CONTROL, (fixed
ground speed) drive the combine into
the crop at your desired speed then
press and hold the AUTOPILOT button
for 3 seconds, there will be a beep
from the CEBIS screen. This speed is
now saved.
If using performance mode (constant
throughput), set the target throughput
to the middle then increase until you
reach your desired throughput. Or or
drive into the crop until the desired
throughput is reached, then press
and hold the AUTOPILOT button for 3
seconds, there is beep from CEBIS.
If using the throughput mode,
make sure that the monitors are
showing what you need them to show.
Check your losses!
48