Claas LEXION 7000, Информация и базовые настройки поля

Страница: 31 / 62

Settings: VARIO Cutterbar
Table auger:
The table auger is important
for the transportation of
material to the front elevator.
The timing of the retractable
fingers can be adjusted for
different crops by opening up
the guard on the RHS of the
cutterbar and adjusting the
lever with a spanner. Use the
top holes for short crops and
the lower holes for tall crops
The third hole from bottom is
the standard setting.
Crop wrapping:
If an issue occurs with crop
wrapping around the table
auger in difficult conditions,
there are a number of
procedures that can be carried
out (try one thing at a time):
Adjust the stripper plates
behind the auger. There is also
a second scraper under the
auger that can be accessed
over the top of the auger.
TIP: Remove any knife
play by adjusting the
keeps, and make sure
that the fingers are
not rounded or bent.
A clearer cutting knife
will reduce stress on
the knife drive.
3 0