Claas LEXION 7000, Информация и базовые настройки поля

Страница: 36 / 62

Settings: Pre-Separation
De-awning can be carried out by operating the lever on
the right hand side of the machine, which in turn closes or
opens a set of plates under the APS concave. This keeps
the crop in until the main concave.
Concave flap.
The concave flap can be engaged and disengaged from
the CEBIS screen or by the handle on the left of the
machine. Only use this if more threshing is required or there
is a very dry crop and there is a lot of broken straw.
De-awning:
The stone trap is situated
between the front elevator
and the APS concave.
It is important that the stone
trap is emptied regularly
to allow for foreign objects
to be expelled before they
enter the drum. Make sure
the lever is in the up and
locked position before
lowering the feeder housing.
Swing in the concave
bar when extra threshing
is required. Try all other
settings first.
Find more detailed
information on chapter
7.14.
Stone Trap: Further Information:
35
TIP: Only engage the
concave flap, threshing
bar and the disawning
plates one at a time.