Intro4
Convenience
Additional functions
Input/output function
Ready output
Servo state output
Encoder output
Servo on input
Position deviation counter clear input
Parameter
Setting positioning complete signal output duration
Can be set h 0 to 100ms range.
Mode selection of in position input
Position output ON all the time within the in-
position range or ON only when it is stopped within
the in-position range.
Additional program selection method
Select programs with 6bit input (0 to 6)
Operation start with selection input + start input
Reduce tact time by reducing the time required to
operate after program selection by abbreviating the
program number setting input.
Prevents free-run when alarm is on
Slows down and stops the servo when an alarm
caused by coasting goes off to prevent accidents
■
■
■
■
Adjustment and installation support tool (AX
tools) comes standard.
Get the right adjustments in less time.
Teaching note
Create programs and set parameter
Origin offset
Trial run
Semi-automatic tuning (TS type only)
By adjusting one parameter after auto tuning, the
equipment can achieve higher performance.
Speed wave
Review the tuning by measuring the actual change
in velocity and convergent time.
FFT
Deter resonance of mechanisms by setting a notch
filter and low-pass filter.
I/O check
I/O status of host component and can be checked.
■
■
■
■
Features of the Absodex
Green technology
Energy saving
Power is consumed only during indexing. Almost
no power is consumed while the output shaft is
stopped.
No need to replace or dispose lubricant
N o m o r e t a s k o f r e p l a c i n g a n d d i s p o s i n g
lubricants. Eliminates pollution caused by oil
leakage.
Smaller components, smaller equipment
Does not require origin detection sensor, reducer
and etc.
Easy to change specifications, reusable
Can be reused unlike mechanical indexes by
changing specifications using computers and the
teaching pendant.
■
■
■
■
Return to origin not required
Because the absodex has an absolute resolver that can detect the
current position right after being turned on, you don't need to do
an return to origin operation each and every time. You can also
restart form the current position after and emergency stop also.
Smooth cam curve drive
5 types of cam curves are installed as standard.
Minimizes the shock during rotation and stop.
Model selection software (free)
Select the model you need with ease.
