Intro10
Install an over current protection component.
The precautions are ranked as "DANGER", "WARNING" and "CAUTION" in this section.
Note that some items described as “CAUTION” may lead to serious results depending on the situation.
In any case, important information that must be observed is explained.
DANGER:
When a dangerous situation may occur if handling is mistaken leading to fatal or
serious injuries, or when there is a high degree of emergency to a warning.
WARNING:
When a dangerous situation may occur if handling is mistaken leading to fatal or
serious injuries.
CAUTION
When a dangerous situation may occur if handling is mistaken leading to minor
injuries or physical damage.
Observe precautions on the pages that follow to prevent accidents.
Wire according to "JIS B 9960-1: 2008 Safety of Machinery - Electrical Equipment of Machines - Part 1 : General
Requirements", and install an overcurrent protection device (such as molded case circuit breakers and circuit protectors)
to the main•control power (terminal gland no. L1, L2, L3, L1C, L2C) and power supply for I/O (connector no. CN3-DV24V)
(Translation of an excerpt from JIS B9960-1 7.2.1 general requirements)
Overcurrent protection shall be provided in cases where the circuit current in a machine (electrical equipment) can exceed
the lesser of either the rating of a component or allowable ampacity of the conductor. Ratings or settings to be assigned
are set in 7.2.10.
WARRANTY
Scope of warranty
Conditions related to the warranty term and scope are as follows:
1. Term of warranty
This product comes with a 1 year warranty from delivery. (this warranty is effective if the product is not operated
for more than 8 hours a day. The warranty will expire if the product reaches its durability shown below)
Durability (direct drive actuator)
Absodex brake with air brake, piston packing, valves
2. Scope of warranty
If any faults found to be the responsibility of CKD occur during the above warranty term, the part shall
be repaired immediately by CKD free of charge.
Note that the following faults are excluded from the warranty term:
Product abuse/misuse contrary to conditions/environment recommended in its catalogs/specifications.
Faults caused by careless or incorrect handling, or improper control.
Faults caused by factors other than delivered parts.
Faults caused by improper product use.
Faults due to modifications to the product structure , performance, or specifications by a party other
than CKD after the product is delivered, or faults caused by repairs not designated by CKD.
Damage that could have been avoided if the user's machine or equipment had functions and
structures, etc., considered normal within the industry.
Failure due to causes not foreseeable with the technology at the time of delivery.
Failure due to fires, earthquakes, water damage, lightning, other acts of nature, acts of God, pollution,
salt damage, gas damage, abnormal voltage, or other external forces.
The warranty here refers to the warranty of the actually delivered product, and does not include any
damage resulting from a fault in the delivered product.
. Warranty for exported products
(1) Product returned to our factories or companies/factories designated by CKD will be repaired. CKD is
not liable for the costs and engineering required that is required for the return.
This warranty specifies basic conditions. If warranty details in individual specification drawings or
specifications differ from these warranty conditions, specification drawings or specifications shall take priority.
