6- 43
6-2-8-5 Number of Connected Units Check (Master Unit Only)
Parameter name
Setting value
Remarks
Number of connected units check
(PRS.CHK)
If controllers are connected, this performs a check when the
power is turned ON confirming that the number of connected units
has not changed.
ON / OFF
[Default: OFF]
The number of connected controller units is checked and, if that number has changed, an error is output.
If the number is larger or smaller than that when this parameter was set to ON, an error is output.
When changing the number of connected controller units, set this parameter to OFF, change the number of
units, and then set the parameter to ON again.
Operation procedure
Note
The number of connected units check can only be set on master units.
■
■
Long press
for 2 s
Select
Cancel
Commit