Cisco Small Business 300, Руководство администратора

Страница: 63 / 483

Administration: File Management
Download/Backup Configuration/Log
Cisco Small Business 300 Series Managed Switch Administration Guide 46
4
SSH Client Authentication —Client authentication can be done in one of the
following ways:
• Use SSH Client —Sets permanent SSH user credentials. Click System
Credentials to go to the SSH User Authentication page where the user/
password can be set once for all future use.
• Use SSH Client One-Time Credentials—Enter the following:
- Username —Enter a username for this copy action.
- Password —Enter a password for this copy.
• SCP Server Definition —Select whether to specify the TFTP server by IP
address or by domain name.
• IP Version —Select whether an IPv4 or an IPv6 address is used.
• IPv6 Address Type —Select the IPv6 address type (if used). The options
are:
- Link Local —The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80 , is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
- Global —The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
• Link-Local Interface —Select the link local interface from the list.
• SCP Server IP Address/Name —Enter the IP address or domain name of
the TFTP server.
If Save Action is Download (replacing the file on the device with a new version
from another device), enter the following fields.
• Source File Name—Enter the name of the source file.
• Destination File Type—Select the configuration file type. Only valid file
types are displayed. (The file types are described in the
Files and File
Types section).