SNMP
Defining SNMP Communities
Cisco Small Business 300 Series Managed Switch Administration Guide
458
23
To define SNMP communities:
STEP 1
Click
SNMP
>
Communities
.
This page contains a table of configured SNMP communities and their properties.
STEP 2
Click
Add.
This page enables network managers to define and configure new SNMP
communities.
STEP 3
SNMP Management Station
—Click User Defined to enter the management
station IP address that can access the SNMP community. Click
All
to indicate that
any IP device can access the SNMP community.
•
IP Version
—Select either IPv4 or IPv6.
•
IPv6 Address Type
—Select the supported IPv6 address type if IPv6 is
used. The options are:
-
Link Local
—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of
FE80
, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
-
Global
—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
•
Link Local Interface
—If the IPv6 address type is Link Local, select whether
it is received through a VLAN or ISATAP.
•
IP Address
—Enter the SNMP management station IP address.
•
Community String
—Enter the community name used to authenticate the
management station to the device.
•
Basic
—Select this mode for a selected community. In this mode, there is no
connection to any group. You can only choose the community access level
(Read Only, Read Write, or SNMP Admin) and, optionally, further qualify it for
a specific view. By default, it applies to the entire MIB. If this is selected, enter
the following fields:
-
Access Mode
—Select the access rights of the community. The options
are:
Read Only—Management access is restricted to read-only. Changes
cannot be made to the community.
Содержание Small Business 300
