Cisco Small Business 300, Руководство администратора

Страница: 469 / 483

SNMP
Configuring SNMP Views
Cisco Small Business 300 Series Managed Switch Administration Guide 452
23
- Link Local —The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80 , is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
- Global —The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
• Link Local Interface —Select the link local interface (if IPv6 Address Type
Link Local is selected) from the list.
• Server IP Address/Name— Enter the IP address or domain name of the log
server.
• Engine ID— Enter the Engine ID.
STEP 5
Click Apply . The Running Configuration file is updated.
Configuring SNMP Views
A view is a user-defined label for a collection of MIB subtrees. Each subtree ID is
defined by the
Object ID (OID) of the root of the relevant subtrees. Either well-
known names can be used to specify the root of the desired subtree or an OID can
be entered (see
Model OIDs ).
Each subtree is either included or excluded in the view being defined.
The Views page enables creating and editing SNMP views. The default views
(Default, DefaultSuper) cannot be changed.
Views can be attached to groups in the Groups page or to a community which
employs basic access mode through the Communities page.
To define SNMP views:
STEP 1
Click SNMP > Views .
STEP 2
Click Add to define new views.
STEP 3
Enter the parameters.
• View Name —Enter a view name between 0-30 characters)