Cisco RV260 series, Руководство администратора

Страница: 68 / 124

Step 1 Select LAN > Option82 Settings .
Step 2
Click Add and configure the following:
Step 3 Enter the following information to configure the Option 82 Circuit:
Enter description for option 82 client. Description
Enhances the validation security to determine about the information which is provided
in the Option 82 Circuit ID. Enter the circuit ID and its format.
Circuit ID
Enter the IP address and subnet mask of the device. IP Address & Subnet Mask
Amount of time that a network user is allowed to connect to the router with the current
IP address. Enter the amount of time in minutes. Valid values are 5 to 43200 minutes.
Default is 1440 minutes (24 hours). Client Lease Time
The range start and end of IP addresses that can be assigned dynamically. The range can
be up to the maximum number of IP addresses that the server can assign without
overlapping the PPTP and SSL VPN. For example, if the router uses the default LAN
IP address, 192.168.1.1, the starting value must be 192.168.1.2 or greater. Range Start and Range End
DNS service type: where the DNS server IP address is acquired. DNS Server
Static IP address of a DNS Server. (Optional) if you enter a second DNS server, the
device uses the first DNS server to respond to a request. Static DNS 1 and Static DNS
2
Optional IP address of a Windows Internet Naming Service (WINS) server that resolves
NetBIOS names to IP addresses. Default is blank.
WINS
• Option 66 – Enter the IP address or the hostname of a single TFTP server.
•
Option 150
– Enter the IP addresses of a list of TFTP servers.
• Option 67 – Enter the boot filename.
DHCP Options
Step 4
Click Finish .
Static DHCP
Static DHCP is a useful feature which makes the DHCP server on your router always assign the same IP
address to a specific computer on your LAN. Click
Show Connected Devices to display the devices which
are already connected to the router.
To configure static DHCP, follow these steps:
Step 1 Select
LAN > Static DHCP
.
Step 2 Click Add .
Step 3
Enter a description name.
Step 4
Enter the MAC address and static IPv4 address.
RV260x Administration Guide
60
LAN
Static DHCP