Cisco RV260 series, Руководство администратора

Страница: 40 / 124

A static IP address is a number (in the form of a dotted quad) that is assigned to a
computer by an Internet service provider (ISP) to be its permanent address on the
Internet. Enter the static IP address. Static IP Address
A mask used to determine what subnet an IP address belongs to. Enter the subnet mask. Subnet Mask
A router interface connected to the local network that sends packets out of the local
network. Enter the gateway IP.
Gateway IP
A DNS server is a computer used to resolve hostnames to IP addresses. Enter the IP
address of the DNS. DNS
Enter the IP address of the secondary DNS. Secondary DNS (Optional)
Step 7 If you select PPPoE , click Next and configure these settings.
Enter the account name.
Account Name
Enter the password. Password
Confirm the password. Confirm Password
Step 8 If you select
PPTP
or
L2TP
, click
Next
and configure these settings.
Enter the account name. Account Name
Enter the password.
Password
Confirm the password. Confirm Password
Enter the static IP address. Static IP Address
Enter the subnet mask. Subnet Mask
Enter the gateway IP.
Gateway IP
Enter the DNS. DNS
Step 9
Select the router’s time zone from the Time Zone drop-down list.
Step 10 Select one of the following:
•
Enable Network Time Protocol Synchronization
to set the date and time automatically.
• Set the date and time manually to set the date and time manually or import them from your computer.
Step 11 Click
Next
.
Step 12 In the Choose a MAC address section, select one of the following options:
• Use Default Address (Recommended).
• Use this computer’s address.
• Use this address – Enter a MAC address.
Step 13 Click
Next
.
Step 14 Review your summary settings and click Next .
RV260x Administration Guide
32
System Configuration
Initial Router Setup