Cisco NAC-3310, Руководство по установке

Страница: 99 / 176

3-29
Cisco NAC Appliance Hardware Installation Guide
OL-20326-01
Chapter 3 Installing the Clean Access Manager and Clean Access Server
Installing the Clean Access Server
Step 15
Specify VLAN passthrough behavior for traffic passing from the untrusted to the trusted network. At the
prompt, type
n
and press Enter (or just press Enter) to accept the default behavior (disabled) or enter
y
to enable VLAN ID passthrough for traffic from the untrusted network.
[Vlan Id Passthrough] for packets from eth1 to eth0 is disabled.
Would you like to enable it? (y/n)? [n]
Figure 3-9 VLAN ID Passthrough
Step 16
Specify Management VLAN Tagging for the untrusted interface at the next prompt. Type
N
and press
Enter (or just press Enter) to keep Management VLAN tagging disabled (default). Or, type
Y
and press
Enter to enable Management VLAN tagging and specify the Management VLAN ID to use for the CAS
untrusted interface.
[Management Vlan Tagging] for egress packets of eth1 is disabled.
Would you like to enable it? (y/n)? [n]
Note
You can change the Management VLAN ID later from the CAS Network > IP web console
page; however, changing settings on the CAS IP page requires a reboot of the CAS.
et
h
0
eth
1 VLAN
ID
Trusted network Untrusted network
Clean Access
Server
VLAN
ID
184095