Cisco NAC-3310, Руководство по установке

Страница: 25 / 176

1-11
Cisco NAC Appliance Hardware Installation Guide
OL-20326-01
Chapter 1 Cisco NAC Appliance Hardware Platforms
NAC-3315, NAC-3355, and NAC-3395
1
FIPS card status LED Solid blue occasionally blinking off = FIPS card is enabled and
accepting commands
Two short blue flashes followed by a pause = FIPS card is in
initialization mode
Two longer blue flashes followed by a pause = FIPS card is in
maintenance mode
Repeatedly flashing morse code distress call (. . . - - - . . .)—three
short blue flashes followed by three longer blue flashes followed
again by three more short blue flashes = FIPS card is in error mode
Off = There is no power source connected to the FIPS card
2
NIC 1 (eth0) activity LED Green = Activity exists
Flashing green = Activity exists
Off = No activity exists
3
NIC 1 (eth0) link LED Green = Link exists
Off = No link exists
4
AC power LED Green = AC power source is connected to power supply
Off = No AC power source is connected to power supply
5
DC power LED Green = DC power source is connected to power supply
Off = No DC power source is connected to power supply
6
Power supply error LED Amber = Power source to power supply is present, but power
supply is in error state
Off = Power supply is functioning normally (if AC and DC power
indicators are green) or power supply is disconnected
7
System error LED Amber = Indicates that a system error has occurred
Off = The system is functioning normally
8
Rear Locator LED Flashing blue = The Front Locator button has been pressed
9
Power LED Green = The appliance has AC power and is powered up
Rapidly flashing green = The appliance is off and is not yet ready
to be turned on (the appliance typically only remains in this state
for 1 to 3 minutes)
Slowly flashing green = The appliance is currently off and ready
to be turned on
slowly fading on/off green = The appliance is in power-save mode
and is ready to be turned on
Off = The appliance is powered off (power is disconnected)