4-13
Cisco NAC Appliance Hardware Installation Guide
OL-20326-01
Chapter 4 Configuring High Availability (HA)
Installing a Clean Access Manager High Availability Pair
If using a CA-signed certificate for the HA pair:
a.
Click
Browse
and navigate to the location on your local machine where you have saved the
CA-signed certificate you received from your Certificate Authority and the associated Private Key
you exported from the HA-Primary CAS and saved to your local machine.
b.
Select the CA-signed certificate file and click
Import
.
c.
Repeat the process to import the Private Key.
For more information, see the “Manage CAM SSL Certificates” section of the
Cisco NAC Appliance -
Clean Access Manager Configuration Guide, Release 4.8(3)
.
Step 4
Go to the
Administration
>
CCA Manager
>
Network
and change the
IP Address
of the secondary
CAM to an address that is different from the HA-Primary CAM IP address and the Service IP address
(such as
x
.
x
.
x
.122
).
Figure 4-6
HA-Secondary Clean Access Manager Failover Settings
Step 5
Set the
Host Name
value to the same value set for the
Peer Host Name
in the HA-Primary CAM
configuration. See
Figure 4-4 on page 4-6
.
Note
The
Host Name
and
Peer Host Name
fields are case-sensitive. Make sure to match what is typed
here with what was typed for the HA-Primary CAM.
Step 6
Choose
HA-Secondary
in the
Clean Access Manager Mode
dropdown menu.
The high availability
settings appear.
Step 7
Set the
Service IP Address
value to the same value set for the
Service IP Address
in the HA-Primary
CAM configuration.
Содержание NAC-3310
Страница 8: ...Contents 6 Cisco NAC Appliance Hardware Installation Guide OL 20326 01 ...
Страница 172: ...A 4 Cisco NAC Appliance Hardware Installation Guide OL 20326 01 Appendix A Open Source License Acknowledgements Notices ...
Страница 176: ...Index IN 4 Cisco NAC Appliance Hardware Installation Guide OL 20326 01 ...
