Cisco NAC-3310, Руководство по установке

Страница: 115 / 176

3-45
Cisco NAC Appliance Hardware Installation Guide
OL-20326-01
Chapter 3 Installing the Clean Access Manager and Clean Access Server
Useful CLI Commands for the CAM/CAS
The Clean Access Server is shipped with a default version of the Cisco NAC Profiler Collector
component, which needs to be enabled and configured separately when integrating with the Cisco NAC
Profiler solution.
Table 3-5 lists CLI commands issued on the CAS for the Cisco NAC Profiler Collector
service. For complete details on the Cisco NAC Profiler solution, refer to the Cisco NAC Profiler
Installation and Configuration Guide and Release Notes for Cisco NAC Profiler .
Note
To display the version of the Collector on the CAS, SSH to the CAS machine running the Collector
service and type
rpm -q Collector .
Table 3-5 Cisco NAC Profiler Collector CLI Commands for CAS
Command Description
service collector start
Starts the Collector service on the CAS.
service collector stop Shuts down the Collector service on the CAS.
service collector verify
Displays the configured Collector Services running on the CAS
Collector Network Configuration
Collector Name = bcas1-fw
Connection Type = server
Listen on IP = 10.40.1.10
Network IP ACL
127.0.0.1
10.10.0.211
10.10.0.210
10.10.0.212
Port Number = 31416
Encryption type = AES
Shared secret = profiler
service collector status Displays the running status of the individual Collector modules
on the CAS, for example:
Profiler Status
o Server Not Installed
o Forwarder Running
o NetMap Running
o NetTrap Running
o NetWatch Running
o NetInquiry Running
o NetRelay Running