Cisco NAC-3310, Руководство по установке

Страница: 94 / 176

3-24
Cisco NAC Appliance Hardware Installation Guide
OL-20326-01
Chapter 3 Installing the Clean Access Manager and Clean Access Server
Installing the Clean Access Server
Caution
Only one CD is used for installation of the Clean Access Manager or Clean Access Server software. You
must select the appropriate type,
either CAM or CAS, for the target machine on which you are
performing installation.
Step 9
The Clean Access Server Package Installation then executes. The installation takes several minutes.
When finished, the installation script presents the following message, prompting you to press Enter to
reboot the CAS and launch the Clean Access Server quick configuration utility.
Installation complete. Press <ENTER> to continue
When finished, the welcome screen for the Clean Access Server quick configuration utility appears, and
a series of questions prompt you for the initial CAS configuration, as described in
Configuration Utility
Script, page 3-6 .
Perform the Initial CAS Configuration
When installing the Clean Access Server from CD-ROM, the Configuration Utility Script automatically
appears after software package installation to prompt you for the initial CAS configuration.
Note
If necessary, you can always manually start the Configuration Utility Script as follows:
1. Over a serial connection or working directly on the CAS, log onto the CAS as user
root
with the
root user password.
2.
Run the initial configuration script by entering the following command:
service perfigo config
You can run the
service perfigo config
command to modify the configuration of the CAS if it cannot
be reached through the web admin console. For further details on CLI commands, see CAS CLI
Commands, page 3-43 .
Configuration Utility Script
Step 1 The configuration utility script suggests default values for particular parameters. To configure the
installation, either accept the default value or provide a new one, as described below.
Step 2
After the software is installed from the CD and package installation is complete, the welcome script for
the configuration utility appears:
Welcome to the Cisco Clean Access Server quick configuration utility.
Note that you need to be root to execute this utility.
The utility will now ask you a series of configuration questions.
Please answer them carefully.
Cisco Clean Access Server, (C) 2012 Cisco Systems, Inc.