Cisco N5010P-N2K-BE, Руководство по настройке программного обеспечения

Страница: 341 / 704

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
23-3
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 23 Configuring Session Manager
Configuring Session Manager
Verifying a Session
To verify a session, use the following command in session mode:
Committing a Session
To commit a session, use the following command in session mode:
Saving a Session
To save a session, use the following command in session mode:
Discarding a Session
To discard a session, use the following command in session mode:
Session Manager Example Configuration
This example shows how to create a configuration session for ACLs:
switch# configure session name test2
switch(config-s)# ip access-list acl2
switch(config-s-acl)# permit tcp any any
switch(config-s-acl)# exit
switch(config-s)# interface Ethernet 1/4
switch(config-s-ip)# ip port access-group acl2 in
switch(config-s-ip)# exit
switch(config-s)# verify
switch(config-s)# exit
switch# show configuration session test2
Command Purpose
switch(config-s)# verify [ verbose ]
Verifies the commands in the configuration session.
Command Purpose
switch(config-s)# commit [ verbose ]
Commits the commands in the configuration session.
Command Purpose
switch(config-s)# save location
(Optional) Saves the session to a file. The location can be
in bootflash or volatile.
Command Purpose
switch(config-s)# abort
Discards the configuration session without applying the
commands.